Expertise

Terry Foster Managing Director - 33 years experience in the specialist field of repair welding and engineering

Bruce Legg Tool and Die Manager, Workshop Foreman – 25 years experience including 3 years in the UK

We cover a vast range of engineering and welding work to reclaim and salvage over machined, worn, corroded or broken parts. We have techniques for welding sharp edges with no weld undercut and to limit the heat affected zone after welding. There are many reasons why breakage occurs and in the case of poor design or weak materials modifications can be made during the repair to ensure the problem does not reoccur.

We specialise in P20, H13, 420, D2+A1 tool steels and use the Argotron weld process. We are fully equipped for air, oil or water hardening, hot work, cold work or high speed steel; if they have been heat treated and require a particular hardness or have been annealed and require subsequent heat treatment

A typical cross section of components on which repairs are under taken at regular intervals to reclaim and salvage over machined, worn, corroded, or broken parts.

Cylinder heads	Engine blocks	Manifolds	Bellhousings
Gearbox housings	Tappet and side covers	Sumps	Pistons
Diff housings	Crown wheel pinions	Gear teeth	Gear selectors
Needle roller diameters	Shaft build-ups	Rolls	Machine parts
Spring Hangers	Fork hoist forks	Crankshafts	Hard facing
Hot & cold metal spray	Special steels	Tool and die welding	Extrusion screws & barrels refurbished
Pressure piping	General fabrications	Tanks	Heating exchangers
Marine parts	Alloy wheels